Solid Wood Pallet For Block Machine

The solid wood brick pallet is using the southern pine and Melochia pine are selected as raw materials.

Raw material is containing 14%-16% water, and will be drying for 4-5 days in the drying room at the temperature of 80-100℃, this process is to remove the water and oil content in the wood, to ensure non-deformation; then the brick pallet will not shrink or expand during being used.

Solid Wood Pallet For Block Machine

The connecting rod uses stop screws to fix the wooden board;
U-shaped steel is added at both ends to enhance the strength of the wooden board and protect the wooden brick pallet from damage during the brick making process;
The pallet’s crosspieces are fixed with male and female stitching, and locked with 4 8mm screws, and both ends of the product are fixed with C-shaped steel.
The surface is mechanically polished to ensure that the surface of the product is smooth and flat, and the thickness is completely uniform;
The pallet is soaked in 120℃ engine oil for 2 hours to make the pallet wear-resistant and non-deformable, and extend its service life;
This sturdy wooden pallet is suitable for steam curing.

Specifications of solid wood brick pallet:

Density:	0.8 g/cm3	Lumber moisture content:	<12%
Temperature resistance:	Under 120 degrees Celsius	The static bending strength of the pallets(Longitudinal):	≥39MPa
loading capacity	650KG	Elastic capacity:	≥3000 MPa
Length and width:	Designed as per clients requirement	Thickness:	30-50mm
Pallet thickness deviation is +1～-1.5 mm; length deviation is +1～-4 mm; timber deviation is less than 1mm